SKU: 21977032566

Replacement Washing Machine Water Pump, Fits Maytag, Compatible with Part 21001906

$26.10 $29.00
Save 10%
No.2 Bestseller on albidaaevents.com >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 10 - Jul 15

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Replacement Washing Machine Water Pump, Fits Maytag, Compatible with Part 21001906So you are done doing your laundry and your washing machine does not drain water properly. Don't panic! It's just that your water pump might not be working properly. Don't throw your entire washing machine. This problem can easily be resolved by replacing your old water pump with a new one. Designed to fit: Herrin Style Maytag top load washers Maytag, Magic Chef & Norge washing machine water pump This is a replacement for: Part # 1002240, 21001723,

So you are done doing your laundry and your washing machine does not drain water properly. Don't panic! It's just that your water pump might not be working properly. Don't throw your entire washing machine. This problem can easily be resolved by replacing your old water pump with a new one.

 

Designed to fit:

  • Herrin Style Maytag top load washers
  • Maytag, Magic Chef & Norge washing machine water pump

 

This is a replacement for:

  • Part # 1002240, 21001723, 21001873, 21001906, 21002219, 35-6465 & 35-6780

 


Please note the following important information about this product from Think Crucial: (i) it is a generic replacement, NOT a Maytag®, Magic Chef® & Norge® Original Equipment Manufacturer (OEM) product; (ii) because it is not a Maytag®, Magic Chef® & Norge® OEM product, it is not covered by any Maytag®, Magic Chef® & Norge® guarantee or warranty; (iii) use of this generic replacement may violate or void Maytag®, Magic Chef® & Norge's® guarantee or warranty - it is entirely your responsibility to check, and entirely your risk if you decide to use this product; (iv) we do not guarantee or warrant that this generic replacement is compatible with any product from Maytag®, Magic Chef® & Norge® or any other provider. Please check your manufacturer's warranty with regard to the use of non-OEM parts. Think Crucial provides no warranty or guarantee with regard to the product or its compatibility with your Maytag®, Magic Chef® & Norge® product. The Maytag®, Magic Chef® & Norge® brand and all Maytag®, Magic Chef® & Norge® trademarks belong to Maytag®, Magic Chef® & Norge® or its affiliates, and are used here only to explain the compatibility features of the generic replacement product.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 21977032566

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 1405 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
M
Verified Purchase
Miguel
Charlottesville, US
★★★★★ 5
Great wiring harness for light installations.
Size: 16AWG Wiring Harness-2 Leads, Size: 16AWG Wiring Harness-2 Leads
This is a great wiring harness for LED lights. These come in one or two leads application. All that means is that they come ready for one or two lights, depending on your installation. The plug in connectors for each light comes with the set so that is a plus. I’ve attached a picture of the plug/connector for the lights so you can take a look at them. Although the relay is an “overkill” for low wattage LEDs, it’s OK to have it just in case you decide to change your lights for larger ones or halogens, in the future. In my case I will be using this harness in my motorcycle. It is very long for my need, which is great for cars, but too long for motorcycles since you have to remember that room/space is scarce in motorcycles. I ended up cutting the wires to my desired length and using heat shrink butt connectors and “glued” heat shrink covers for waterproofing the connection points. All in all these are great quality and I am very happy with them.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 16, 2020
M
Verified Purchase
Marina De Leon
Dallas, US
★★★★★ 5
Nice
Size: 16AWG Wiring Harness-2 Leads
Worked great, easy to install
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 8, 2026
D
Verified Purchase
Dan from Georgia
Draper, US
★★★★★ 4
Wire length between the two connectors is short for a full-size pickup
Size: 16AWG Wiring Harness-2 Leads
I used the harness to wire ditch lights on opposite sides of a full-size pickup (F150). The wire between the 2 2-pin connectors was about 18 inches too short. Fortunately, splicing the wires from the (Nilight) ditch lights and the included pigtails gave barely enough length to reach the connectors. The connectors are buried inside the trim channel for the cowl; I'd have preferred they were exposed on each side to allow for easy swapping of the lights, but I can live with it. There is more than enough wire from the first connector to the relay for my all-under-hood installation, but I didn't think to measure if it would reach into the truck bed. The harness is of good quality and is a very good value. It would be a 5-star if it weren't for that little length issue.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 1, 2025
N
Verified Purchase
Nate Higgers
West Palm Beach, US
★★★★★ 5
great value
Size: 16AWG Wiring Harness-2 Leads
very affordable light install kit. worth the price just in the wiring connectors. I used this with my Nilight front bumper kit. i bypassed the button and wired high beam (+) to the yellow small wire. I did this so when the highbeams come on the light bar comes on. because with the stock arragement of this harness, the button continously draws power for the indicator LED
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 30, 2026
L
Verified Purchase
Lee Mintz
Boise, US
★★★★★ 5
The Easiest!
Size: 16AWG Wiring Harness-2 Leads
This is one of the best and easiest wiring system to install that I have every used. And the price is great!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 11, 2025

recommand products

Philips Hue White and Color Ambiance Outdoor LED Dimmable Smart Wireless Light Strip, 2M (197 in)
119.78
Philips 75-Watt Equivalent BA11 Dimmable Warm Glow LED Bent-Tip Candle Bulb, E26 Medium Base, Soft White 2700K, 3-Pack
22.78
Flexco 2-in x 78-in Harvest Solid Wood Floor Threshold
40.00
allen + roth Provincial Hickory 3/4-in T x 5-in W Distressed Solid Hardwood Flooring ( 20-sq ft / Carton )
137.80
Philips Soft White G25 LED 40-Watt Equivalent Dimmable Smart Wi‑Fi WiZ Connected Wireless Light Bulb (2‑Pack)
19.45